Specifications:

The Chess 17/12NT is able to spread the signals by 4 different Quattro LNBs to 12 outputs.
The Multiswitch has 17 inputs, 4 for each satellite and one input for a terr. antenna.
Just indoor installation.

Technical specifications17/6NT

Inputs: 16 satellite + 1 terrestrial
Receiver outputs: 12
Cascade outputs: 17
Input frequency Sat: 950-2300 MHz
Input frequency Terr.: 47-862 MHz
Through loss SAT: -3...-9dB
Max. inputlevel SAT:95 dBµV
Through loss terr.: -13...-19 dB
Input voltage: 230 V AC/ 50Hz/27V
Power consumption: 27VA max

Dimensions (B x T x H)mm: 480 x 195 x 42/63 (Multi-switch/power-supply)
Weight:1,6kg

DiSEqC 2.0

made in Germany

Operating temperature range: -20… + 60° C/

Multi-switch with 17 inputs and 12 outputs. DiSEqC 2.0 compatible device for indoor use with an integrated power supply protected by a fuse and short-circuit protection with acoustic alarm. The LED on the power supply indicates the power supply activity. In case of a short-circuit on a SAT input, the LED goes off and the acoustic alarm is activated. After removal of the shortcircuit cause, the multi-switch power supply starts to operate immediately. It allows to use of 4 Quatro LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command "22 kHz" to up to 4 selected SAT inputs for high band continuously. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. This multi-switches is equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).


Specifications of S. 170-CP-8
Frequency Range LNB-Inputs: 950-2150 MHz
Frequency Range Terr. Input: 40-862 MHz
Frequency Range Outputs: 40-2150 MHz
Control: DiSEqC commands
Insertion Loss 950-2150 MHz: loss 3dB avg.
Insertion Loss 40-862 MHz: gain 39dB avg.
SAT Inputs Isolation: 20 dB min.
Maximum Input Level SAT: 94 dBµV
Maximum Input Level Terr.: 83 dBµV
Power consumption (incl. connected LNBs): 45 VA max.
LNB power supply: 1600 mA max.
Dimensions (w,d,h [cm]): 43.6 x 15.2 x 8.0
Temperature range: -25 °C - +60 °C

Multi-switch with 17 inputs and 16 outputs. DiSEqC 2.0 compatible device for indoor use with an integrated power supply protected by a fuse and short-circuit protection with acoustic alarm. The LED on the power supply indicates the power supply activity. In case of a short-circuit on a SAT input, the LED goes off and the acoustic alarm is activated. After removal of the shortcircuit cause, the multi-switch power supply starts to operate immediately. It allows to use of 4 Quatro LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command "22 kHz" to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. This multi-switches is equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).

Specifications of S. 170-CP-16
Frequency Range LNB-Inputs: 950-2150 MHz
Frequency Range Terr. Input: 40-862 MHz
Frequency Range Outputs: 40-2150 MHz
Control: DiSEqC commands
Insertion Loss 950-2150 MHz: 5dB avg.
Insertion Loss 40-862 MHz: 0dB avg.
SAT Inputs Isolation: 20 dB min.
Maximum Input Level SAT: 94 dBµV
Maximum Input Level Terr.: 83 dBµV
Power consumption (incl. connected LNBs): 45 VA max.
LNB power supply: 1600 mA max.
Dimensions (w,d,h [cm]): 43.6 x 15.2 x 8.0
Temperature range: -25 °C - +60 °C

Multi-switch with 17 inputs and 8 outputs. DiSEqC 2.0 compatible device for indoor use with an integrated power supply protected by a fuse and short-circuit protection with acoustic alarm. The LED on the power supply indicates the power supply activity. In case of a short-circuit on a SAT input, the LED goes off and the acoustic alarm is activated. After removal of the shortcircuit cause, the multi-switch power supply starts to operate immediately. It allows to use of 4 Quatro-LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command "22 kHz" to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. This multi-switches is equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).

Specifications of S. 170-CP-8
Frequency Range LNB-Inputs: 950-2150 MHz
Frequency Range Terr. Input: 40-862 MHz
Frequency Range Outputs: 40-2150 MHz
Control: DiSEqC commands
Insertion Loss 950-2150 MHz: 0 dB avg.
Insertion Loss 40-862 MHz: 5 dB avg.
SAT Inputs Isolation: 20 dB min.
Maximum Input Level SAT: 94 dBµV
Maximum Input Level Terr.: 830 dBµV
Power consumption (incl. connected LNBs): 45 VA max.
LNB power supply: 1600 mA max.
Dimensions (w,d,h [cm]): 43.6 x 15.2 x 8.0
Temperature range: -25 °C - +60 °C

Features:
Terrestrial:
Terrestrial amplifier using push-pull technology!
With the integrated variable attenuator active or passive distribution can be selected:
In active mode too high input levels can be decreased 0 ... 15 dB.
Turned to max. attenuation the amplifier is bypassed and turned off. The passive distribution is return path compatible
(5 ... 862 MHz).

Dimensions: 325 x 210 x 47mm